Rmon Statistics Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Type
Community
Event Last Time
Buttons
4.23.3

RMON Statistics Configuration

Configure RMON Statistics table on this section. The entry index key is ID.
Figure 4-206: RMON Statistics Configuration
Table 4-179: RMON Statistics Configuration Parameters
Delete
ID
Data Source
Buttons
Indicates the notification of the event, the possible types are:
none: The total number of octets received on the interface, including
framing characters.
log The number of uni-cast packets delivered to a higher-layer
protocol.
snmptrap: The number of broad-cast and multi-cast packets delivered
to a higher-layer protocol.
logandtrap: The number of inbound packets that are discarded even
the packets are normal
Specify the community when trap is sent, the string length is from 0 to
127, default is "public".
Indicates the value of sysUpTime at the time this event entry last
generated an event.
Add New Entry: Click to add a new community entry
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
Check to delete the entry. It will be deleted during the next save.
Indicates the index of the entry. The range is from 1 to 65535.
Indicates the port ID which wants to be monitored. If in stacking
switch, the value must add 1000000*(switch ID-1), for example, if the
port is switch 3 port 5, the value is 20000005
Add New Entry: Click to add a new community entry
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
347