Sync Output - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Figure 4-108: SyncCenter Status
Table 4-105: SyncCenter Status parameters
SyncCenter Status
State
Locked to
Time in State
Time in current
output quality
WTR Active
WTR Time
Buttons
4.12.5

Sync Output

Figure 4-109: Sync Output Status
Table 4-106: Sync Output parameters
Sync Output
Output
Locked
Quality
Shows the current system's overall synchronization state (e.g. Locked).
The state is also evident in the color of the SyncCenter main block
diagram
Indicates the sync source (type and port/instance) the system is currently
locked to (e.g. SyncE 2).
The time that has passed since the last system sync state change.
The time that has passed since the last output QL change
Indicates the active status of the WTR timer. Green means timer is not
running (i.e. system stable), Amber means timer is currently running and
Grey indicates WTR is disabled.
Indicates the time left before the WTR timer expires (when running).
Configuration: Direct link to the
Refresh: Click to refresh the page immediately.
Auto-refresh Check this box to refresh the page automatically.
Automatic refresh occurs every
Indicates the type of output (e.g. SyncE, PTP or TDM).
Indicates the clock output which is used to synchronize the functional block
in 'Output'.
Indicates the clock quality distributed on this type of output
202
SyncCenter configuration
seconds.
3
page