Dhcp Snooping Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
5.2.4

DHCP Snooping Configuration

Configure DHCP Snooping on this section
Figure 5-10: DHCP Server Pool Configuration
Table 5-9: DHCP Server Pool Configuration Parameters
DHCP Snooping Configuration
Snooping Indicates the DHCP Snooping mode of operation.Possible modes are
Enabled: Enable DHCP snooping mode operation
mode
When DHCP snooping mode operation is enabled, the DHCP request
messages will be forwarded to trusted ports and only allow reply packets
from trusted ports.
Disabled: Disable DHCP snooping mode operation.
Port Mode Indicates the DHCP snooping mode .Possible modes are:
Trusted: Configures the port as trusted source of the DHCP messages
Configuration
Untrusted: Configures the port as untrusted source of the DHCP messages
Buttons Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
377