Dying Gasp Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.3.8

Dying Gasp Configuration

This section configures dying gasp parameters.
Figure 4-11: Dying Gasp Configuration
Table 4-10: Dying Gasp Configuration Parameters
System Log Configuration
Port
Mode
Frame Type
Tx Frames
Buttons
Select the port to which the Dying Gasp is applied
Enable or disable dying gasp functionality for a port
Select the sending frame format during dying gasp.
SNMP or Link OAM
Indicates the number of frames to transmit during dying gasp
Tx Frames can be set between 1 to 5 frames
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to
previously saved values.
Refresh:
Click to refresh the screen; any changes made locally will be
undone
Auto-refresh : Check this box to refresh the page
automatically. Automatic refresh occurs every 3 seconds
35