Detailed Link Oam Link Events Status For Selected Port - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.21.5

Detailed Link OAM Link Events Status for selected port

This section allows the user to inspect the current Link OAM Link Event configurations, and change
them as well.
The left pane displays the Event status for the Local OAM unit while the right pane displays the
status for the Peer for the respective port.
Figure 4-167: Detailed Link OAM Link Status Events for selected port
Table 4-159: Link OAM Link Status Events for selected port Parameters
Port
Sequence
Number
Frame Error
Event
Timestamp
Frame error
event window
Frame error
event threshold
The switch port number.
This two-octet field indicates the total number of events
occurred at the remote end
This two-octet field indicates the time reference when the
event was generated, in terms of 100 ms intervals.
This two-octet field indicates the duration of the period in
terms of 100 ms intervals. 1) The default value is one
second. 2) The lower bound is one second. 3) The upper
bound is one minute.
This four-octet field indicates the number of detected
errored frames in the period is required to be equal to or
greater than in order for the event to be generated. 1) The
default value is one frame error. 2) The lower bound is zero
frame errors. 3) The upper bound is unspecified
301