Sflow Statistics - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
With counter polling enabled, this specifies the interval - in seconds - between
Counter Poller
counter poller samples. Valid range is 1 to 3600 seconds.
Interval
Buttons Refresh:
Click to refresh this sub-section. Note that unsaved changes will be lost.
Save: Click to save changes. Note that sFlow configuration is not persisted to
non-volatile memory.
Reset: Click to undo any changes made locally and revert to previously saved
values.
Table 4-189: sFlow Configuration displays parameters
4.30.2

sFlow Statistics

This sub-section shows receiver and per-port
Figure 4-217: sFlow Statistics displays
statistics
sFlow
360