Snmpv3 Access Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
5.5.7

SNMPv3 Access Configuration

Configure SNMPv3 accesses table. The entry index keys are "Group Name", "Security Model" and
"Security Level".
Figure 5-29: SNMPv3 Access Configuration
Table 5-28: SNMPv3 Access Configuration Parameters
SNMPv3 Access Configuration
Delete
Group Name
Security Model
Security Level
Read View
Name
Write View
Name
Buttons
Check to delete the entry. It will be deleted during the next save.
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Indicates the security model that this entry should belong to. Possible
security models are:
any: Any security model accepted (v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM).
Indicates the security model that this entry should belong to. Possible
security models are:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
The name of the MIB view, defining the MIB objects for which this
request may request the current values.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
The name of the MIB view, defining the MIB objects for which this
request may potentially SET new values.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
Add New Entry: Click to add a new access entry.
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
400