External Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.13

External Configuration

Note: Refer to section "
units support this subject
Figure 4-110: External Clock Configuration
Table 4-107: External Clock Configuration parameters
Port
Indicates sync port number.
Mode
Enable or disable the sync port.
Set the port to either input or output.
Direction
Set the port's output source and frequency.
Output Type
Applicable when the port is set to Output
Can be set to :None,SyncE,PTP,TDM,GPS, and External
Cloock Source
Port T/1 thru T1/8 selection
Port
Frequency Set the port's input/output frequency.
Available options are 10MHz and 1PPS
Fibrolan Falcon Products Matrix"2016
" to find out which Fibrolan
204