Trap Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Write
Community
Engine ID
Buttons
5.5.2

Trap Configuration

Configure the SNMP trap on this section.
Figure 5-24: SNMP Trap Configuration display
Indicates the community write access string to permit access to SNMP
agent.The allowed string length is 0 to 255, and the allowed content is
the ASCII characters from 33 to 126.
The field is applicable only when SNMP version is SNMPv1 or SNMPv2c.
If If SNMP version is SNMPv3, the community string will be associated
with SNMPv3 communities table.
It It provides more flexibility to configure security name than a SNMPv1
or SNMPv2c community string.
In In addition to community string, a particular range of source
addresses can be used to restrict source subne
Indicates the SNMPv3 engine ID.
The string must contain an even number(in hexadecimal format) with
number of digits between 10 and 64, but all-zeros and all-'F's are not
allowed.
Change of the Engine ID will clear all original local users.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved
values.
393