Qos Control List Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.8.10

QoS Control List Configuration

This section shows the QoS Control List (QCL), which is made up of the QCEs. Each row describes a
QCE that is defined. The maximum number of QCEs is 256 on each switch. Click on the lowest plus
sign to add a new QCE to the list.
Figure 4-58: Quality of Service Control List Configuration
Table 4-56: Quality of Service Control List Configuration Parameters
QCE
Indicates the QCE.id
Port Indicates the list of ports configured with the QCE.or 'Any'
Specify the type of Destination MAC addresses for incoming frame. Possible
DMAC
values are:
Any: All types of Destination MAC addresses are allowed.
Unicast: Only Unicast MAC addresses are allowed.
Multicast: Only Multicast MAC addresses are allowed.
Broadcast: Only Broadcast MAC addresses are allowed.
The default value is 'Any'.
SMAC Match specific source MAC address or 'Any'.
If a port is configured to match on destination addresses, this field indicates
the DMAC.
Tag Type Indicates tag type. Possible values are:
Any: Match tagged and untagged frames.
Untagged: Match untagged frames.
Tagged: Match tagged frames.
The default value is 'Any'.
Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in
VID
the range 1-4095 or 'Any
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or
PCP
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
Drop Eligible Indicator: Valid value of DEI can be any of values between
DEI
0, 1 or 'Any'.
Frame Type Indicates the type of frame. Possible values are:
Any: match anyl frame type.
Ethernet: Match Ethernet type frames LLC: Only (LLC) frames are allowed
LLC: Match (LLC) frames..
SNAP: Match(SNAP) frames
IPv4: Match IPV4 frames.
IPv6: Match IPV6 frames.
Indicates the classification action taken on ingress frame if Parameters
Action
configured are matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service
DPL: Classify Drop Precedence Level
DSCP: Classify DSCP value
PCP: Classify PCP value.
DEI: Classify DEI value.
Policy: Classify ACL Policy number.
109