Falcon M-Class | User Guide
4.10.2
Network Security
The Network Security includes the following subjects:
•
MAC Limit
•
Port Security switch and Port Security port status
•
Network Access Server (NAS)
•
Access Control List.(ACL)
•
IP Source Guard ARP Inspection
4.10.2.1
MAC Limit Configuration
This section allows you to configure the MAC Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a MAC
address and VLAN ID. If Limit Control is enabled on a port, the limit specifies the maximum number
of users on the port. (This number cannot exceed 1024). If this number is exceeded, an action takes
place. The action can be one of the four different actions as described below.
The Limit Control module utilizes a lower-layer module, Port Security module, which manages MAC
addresses learnt on the port.
•
The Limit Control configuration consists of two sections:
•
System Configuration
•
Port Configuration
Figure 4-78: MAC Limit Control Configuration
141