Igmp Snooping Status - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.18.4

IGMP Snooping Status

This section provides IGMP Snooping status.
Figure 4-142: IGMP Snooping Status
Table 4-136: IGMP Snooping Status Parameters
Statistics
VLAN ID
Querier Version
HostVersion
Querier Status
Querier Transmitted
Querier Received
V1 Reports Receive
V2 Reports Receive
V3 Reports Receive
V2 Leave Receive
Router Port
Display which ports act as router ports. A router port is a port on the Ethernet switch that leads
towards the Layer 3 multicast device or IGMP querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Port
Status
Buttons
The VLAN ID of the entry.
Currently Working Querier Version.
Currently Working Host Version
Shows the Querier status is "ACTIVE" or "IDLE".
"DISABLE" denotes the specific interface is administratively disabled.
The number of Transmitted Queries.
The number of Received Queries.
The number of Received V1 Reports.
The number of Received V2 Reports.
The number of Received V3 Reports.
The number of Received V2 Leave
Switch port number.
Indicate whether specific port is a router port or not.
Refresh:Click to refresh the screen immediately.
Clear:Clears the statistic counters.
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
253