Gps Antenna Cable Status - FibroLAN Falcon Gen-3 M-Class User Manual

Table of Contents

Advertisement

Falcon M-Class | User Guide
Table 4-113: Satellite Staus parameters
Satellite Status
Satellite PNR
Signal Level
Smmary table
4.14.7

GPS Antenna Cable Status

Figure 4-118: GPS Antenna Cable Status
Table 4-114: GPS Antenna Cable parameters
GPS Antenna Cable Status
Type
Length
Delay
Description
Common
Buttons
The PRN (satellite number) of the tracked satellites.
The satellite's received signal level in terms of Carrier to Noise ratio [dB-
Hz]. The accompanying LED indicates whether the satellite receive level
is good (green) or fair (orange).
When it lights red the GPS can see no satellites.
The type of cable being used for the GPS antenna.
The length of the antenna cable in meters.
Indicates the cable delay in nsec.
A textual description of the cable.
Auto-refresh
: Check this box to enable an automatic refresh of the
page at regular intervals.
Refresh: Click to refresh the page immediately.
Clear: Click to clear current status
Other Buttons: GPS Config. Sky View. Sat Coun are direct links to
the respective pages
211

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nfalcon-mFalcon-mxMfalcon-mx

Table of Contents