4.18.11 Mld Snooping Groups Information - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Display which ports act as router ports. A router port is a port on the Ethernet switch that
leads towards the Layer 3 multicast device or MLD querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
MLD Queries: A router sends MLD Query messages onto a particular link. This router is
called the Querier. There will be only one MLD Querier that wins Querier election on a
particular link.
Querier Election: Querier election is used to dedicate the Querier, the only one router
sends Query messages, on a particular link. Querier election rule defines that
or MLD Querier with the lowest IPv4/IPv6 address wins the election.
Port
Status
Buttons

4.18.11 MLD Snooping Groups Information

Entries in the MLD Group Table are shown on this section
Navigating the MLD Group Table.
Each page shows up to 99 entries from the MLD Group table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the
MLD Group Table. Clicking the Refresh button will update the displayed table starting from that or
the closest next MLD Group Table match. In addition, the two input fields will - upon a Refresh
button click - assume the value of the first displayed entry, allowing for continuous refresh with the
same start address
The >> will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the << button to
start over.
Figure 4-149: MLD Snooping Groups Information
Switch port number.
Indicate whether specific port is a router port or not.
Refresh: Click to refresh the section immediately.
Clear: Clears the statistic counters.
Auto-refresh : Automatic refresh occurs every 3 seconds.
264
IGMP Querier