Rmon History Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.23.4

RMON History Configuration

Configure RMON History table on this section. The entry index key is ID.
Figure 4-207: RMON History Configuration
Table 4-180: RMON History Configuration Parameters
Delete
ID
Data Source
Interval
Buckets
Buckets Granted
Buttons
Check to delete the entry. It will be deleted during the next save.
Indicates the index of the entry. The range is from 1 to 65535.
Indicates the port ID which has to be monitored. If in stacking switch,
the value must add 1000000*(switch ID-1), for example, if the port is
switch 3 port 5, the value is 2000005
Indicates the interval in seconds for sampling the history statistics data.
The range is from 1 to 3600, default value is 1800 seconds
Indicates the maximum data entries associated this History control
entry stored in RMON. The range is from 1 to 3600, default value is 50.
The number of data that shall be saved in the RMON.
Add New Entry: Click to add a new community entry
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
348