Mld Snooping Vlan Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.18.8

MLD Snooping VLAN Configuration

Navigating the MLD Snooping VLAN Table
Each page shows up to 99 entries from the VLAN table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from
the beginning of the VLAN Table. The first displayed will be the one with the lowest VLAN ID found
in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. Clicking the
Refresh button will update the displayed table starting from that or the next closest VLAN Table
match.
The >> will use the last entry of the currently displayed entry as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table.
Use << the button to start over
Figure 4-146: MLD Snooping VLAN Configurations
Table 4-140: MLD Snooping VLAN Configurations Parameters
Delete Check to delete the entry. The designated entry will be deleted during the next
save.
VLAN ID The VLAN ID of the entry.
VLAN ID is a 12-bit field specifying the VLAN to which the frame belongs
MLD Enable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for IGMP
Snooping.
Snooping
Enabled
Querier Enable the MLD Querier election in the VLAN.
Disable to act as a MLD Non-Querier
Election
259