Rmon History Overview - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Buttons
5.10.3

RMON History Overview

This section provides an overview of RMON History entries.
Each page shows up to 99 entries from the Event table, default being 20, selected through the
"entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the Event table
The first displayed will be the one with the lowest Event Index and Log Index found in the Event
table.
The "Start from Event Index and Log Index" allows the user to select the starting point in the Event
table. Clicking the Refresh button will update the displayed table starting from that or the next
closest Event table match.
The >>will use the last entry of the currently displayed entry as a basis for the next lookup
When the end is reached the text "No more entries" is shown in the displayed table.
Use the <<: button to start over.
Figure 5-39: Rmon History Overview
Table 5-35: Rmon History Overview Parameters
RMON History Overview
History Index
Indicates the index of History control entry.
Sample Index Indicates the index of. the data entry associated with the control entry.
Sample Start The value of sysUpTime at the start of the interval over which this sample was
measured.
Drop The total number of events in which packets were dropped by the probe due to lack of
resources.
Octets The total number of octets of data (including those in bad packets) received on the
network.
Auto-refresh : Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds
Refresh: Click to refresh the page immediately.
<<: Updates the the table starting from the first entry in the Alarm
Table, i.e. the entry with the lowest ID.
>>: Updates the table, starting with the entry after the last entry
currently displayed.
414