Factory Defaults - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
6.5.2

Factory Defaults

You can reset the configuration of the switch. Only the IP configuration is retained.
The new configuration is available immediately, which means that no restart is necessary.
Figure 6-11: Restore to Factory Defaults Screen
Table 6-8: Restore to Factory Defaults Parameters
Yes:
No:
Restoring factory default can also be performed by making a physical loopback
Note:
between port 1 and port 2 within the first minute from switch reboot. In the first minute
after boot, 'loopback' packets will be transmitted at port 1. If a 'loopback' packet is
received at port 2 the switch will do a restore to default
Click to reset the configuration to Factory Defaults.
Click to return to the Port State screen without resetting the configuration.
431