Monitoring Gps Status; Gps Alarms - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
PPS Not Gen When it lights red the GPS cannot generate 1PPS signal.
Refresh: Click to refresh the page immediately.
Buttons
Auto-refresh
refresh occurs every 3 seconds.
Clear : Click to clear current status.
4.14.4

Monitoring GPS Status

This section displays the status of the GPS receiver
Figure 4-115: Monitoring GPS Status
Table 4-111: GPS Status parameters
GPS Status
Indicates the overall status of the GPS receiver (e.g. Doing Fixes).
Status
Indicates the current date as received by the GPS.
Date
Time Indicates the current time of day as received by the GPS.
Latitude
Indicates the current latitude as received by the GPS in degrees.
Longitude Indicates the current longitude as received by the GPS in degrees.
Altitude
Indicates the current altitude as received by the GPS in meters.
Offsets-1PPS Indicates the current estimated 1PPS time error the GPS is generating, in nsec.
Offsets-Clock Indicates the current estimated frequency error the GPS is generating, in ppb.
4.14.5

GPS Alarms

Figure 4-116: Monitoring GPS Alarms
: Check this box to refresh the page automatically. Automatic
209