Software - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
6.5.3

Software

This section facilitates an update of the firmware controlling the switch.
Figure 6-12: Software Upload
Table 6-9: Software Upload Parameters
Browse:
After the software image is uploaded, a page announces that the firmware update is initiated.
After about a minute, the firmware is updated and the switch restarts.
Warning: While the firmware is being updated, Web access appears to be defunct.
The front LED flashes Green/Off with a frequency of 10 Hz while the firmware update
is in progress. Do not restart or power off the device at this time or the switch
may fail to function afterwards.
to the location of a software image and click Upload
432