Dhcp Server Pool Configuration - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
Buttons
5.2.3

DHCP Server Pool Configuration

This page manages DHCP pools. According to the DHCP pool, DHCP server will allocate IP address
and deliver configuration parameters to DHCP client.
Figure 5-9: DHCP Server Pool Configuration
Table 5-8: DHCP Server Pool Configuration Parameters
Pool Setting
Add or delete pools.
Adding a pool and giving a name is to create a new pool with "default"
configuration.
If you want to configure all settings including type, IP subnet mask and lease time,
you can click the pool name to go into the configuration page.
Delete Pool Setting
Configure the pool name that accepts all printable characters, except white space. If you want
to configure the detail settings, you can click the pool name to go into the configuration page.
Display which type of the pool is.:
Network: the pool defines a pool of IP addresses to service more than one DHCP client.
Host: the pool services for a specific DHCP client identified by client identifier or hardware
address
If "-" is displayed, it means not defined.
Display network number of the DHCP address pool.
If "-" is displayed, it means not defined.
Display subnet mask of the DHCP address pool.
If "-" is displayed, it means not defined.
Display lease time of the pool
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Add New Pool: Click to add anew DHCP POOL
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously
saved values.
Add IP Range: Click to add anew exclude IP range..
375