Table of Contents
Advertisement
Falcon M-Class | User Guide
4.12.2
Sync Source Status
Figure 4-106: Sync Source Status
Table 4-103: Sync Source status parameters
Sync Source
Prio
Ena
Type
Port
State
Quality
Buttons
4.12.3
SyncCenter Configuration
Figure 4-107: SyncCenter Configuration
Indicates the sync source priority (1 is highest).
Shows which sync source is enabled or disabled.
Show the type of sync source. Available options depend on model and
may include: SyncE, PTP, GPS, TDM and External.
The port or instance of the selected sync source type. For example: for
SyncE this will be Ethernet port numbers, for PTP the clock instance ID,
etc.
The status of the sync source. When the source provides a valid
reference clock, this indicator will be Green. When source is disabled or
not applicable, indicator will be Grey.
Indicates the sync source's current (clock) quality (QL) as received from
the source (e.g. via SSM). When there is no quality indication received
from the source, a default quality value is shown with parentheses.
Configuration: Direct link to the
Refresh: Click to refresh the page immediately.
Auto-refresh
Check this box to refresh the page automatically.
Automatic refresh occurs every 3 seconds.
200
SyncCenter configuration
page
Hide quick links:
Advertisement
Table of Contents
