Falcon M-Class | User Guide
6
Maintenance
6.1
Diagnostics
Diagnostics include the following procedures:
•
Ping
•
Ping6
•
Link OAM MIB Retrieval
•
Copper Link Test
•
RFC2544
•
Falcon Report Configuration
6.1.1
ICMP Ping
This section allows the user to issue ICMP PING packets to troubleshoot IP connectivity issues
After you press, Start ICMP packets are transmitted, and the sequence number and round trip time
are displayed upon reception of a reply. The amount of data received inside of an IP packet of type
ICMP ECHO_REPLY will always be 8 bytes more than the requested data space (the ICMP header).
The page refreshes automatically until responses to all packets are received, or until a timeout
occurs.
PING server 10.10.132.20, 56 bytes of data.
64 bytes from 10.10.132.20: icmp_seq=0, time=0ms
64 bytes from 10.10.132.20: icmp_seq=1, time=0ms
64 bytes from 10.10.132.20: icmp_seq=2, time=0ms
64 bytes from 10.10.132.20: icmp_seq=3, time=0ms
64 bytes from 10.10.132.20: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
The IP Address and Ping Size Parameters of the issued ICMP packets (for ICMP Ping) can be
configured.
Figure 6-1: ICMP PING Configuration
417