Time Zone - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.3.6

Time Zone

This section allows us to configure the Time Zone
Time Zone Configuration
Daylight Saving Time Configuration
Start Time /End Time/Offset settings
Figure 4-7: Time Zone Configuration
Time Zone Configuration
Time Zone Lists various Time Zones worldwide. Select appropriate Time Zone from the
drop down and click Save to set.
Acronym User can set the acronym of the time zone. This is a User configurable
acronym to identify the time zone. ( Range : Up to 16 characters
Save: Click to save changes.
Buttons
Reset: Click to undo any changes made locally and revert to previously
saved values.
Table 4-6: Syslog Configuration Parameters
Figure 4-8: Daylight Saving Time Configuration
Table 4-7: Daylight Saving Time Configuration Parameters
Daylight Saving Time Mode
This section is used to setup Daylight Saving Time Configuration
Daylight Clear event occurred indication to set the clock forward or
backward according to the configurations set below for a defined
Saving Time
Daylight Saving Time duration.
Select 'Disable' to disable the Daylight Saving Time configuration.
Select 'Recurring' and configure the Daylight Saving Time
duration to repeat the configuration every year.
Select 'Non-Recurring' and configure the Daylight Saving Time
duration for single time configuration.
( Default : Disabled )
Buttons
Save: Click to save changes.
31