Ping 6 - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
6.1.2

Ping 6

M-Class series allow you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity issues.
After you press Start, ICMPv6 packets are transmitted, and the sequence number and roundtrip
time are displayed upon reception of a reply. The page refreshes automatically until responses to
all packets are received, or until a timeout occurs
Figure 6-2: ICMPv6 PING Configuration
PING6 server ff02::2, 56 bytes of data.
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=0, time=10ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=0, time=10ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=1, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=1, time=0ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=2, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=2, time=0ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=3, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=3, time=0ms
64 bytes from fe80::219:5bff:fe2f:b47: icmp_seq=4, time=0ms
64 bytes from fe80::215:58ff:feed:69dd: icmp_seq=4, time=0ms
Sent 5 packets, received 10 OK, 0 bad
You can configure the following properties of the issued ICMP packets
Table 6-1: ICMP PING Parameters
IP Address:
Ping Length:
Ping Count
Ping Interval
The destination IP Address.
The payload size of the ICMP packet. Values range from 2 bytes to
1452 bytes.
The count of the ICMP packet. Values range from 1 time to 60 times.
The interval of the ICMP packet. Values range from 0 second to 30
seconds.
418