Sfp Operational Range - FibroLAN Falcon Gen-3 M-Class User Manual

Falcon M-Class | User Guide
4.5.3

SFP Operational Range

This section shows SFP operational range
If you insert SFPs into port s 7 and 8 you get the following display which show
the operational range. The red indicators under status imply a low Rx error since
there is no reception
Figure 4-16: Operational Range
Table 4-14: SFP Operational Range Parameters
Port
Status
RX Power
TX Power
Temperature
Bias Current
Supply voltage
Buttons
The physical port in which the SFP is installed
The status of the SFP port: grey=unplugged
Red=when SFP is plugged and operational; Green when
the SFP is connected to another similar SFP (installed in
another device)
Module's allowed receive optical power range [dBm].
Module's allowed transmit optical power range [dBm]
Module's allowed internal temperature range.
Module's allowed transmitter bias current range [mA].
Module's allowed supply voltage range [V].
Refresh: Click to refresh the page immediately
Auto-refresh : Check this box to enable an automatic
refresh of the page at regular intervals
43