Option Card Installation; Prior To Installing The Option - YASKAWA iQpump1000 Quick Start Manual

7.1 Option Card Installation

7.1 Option Card Installation
This section provides instructions on installing option cards.
u

Prior to Installing the Option

Prior to installing the option, wire the drive, make necessary connections to the drive terminals, and verify that the drive
functions normally without the option installed.
Table 7.1 below lists the number of options that can be connected to the drive and the drive ports for connecting those options.
Option
SI-P3, SI-EP3, SI-N3, SI-EN3, SI-EM3, SI-B3,
SI-W3, SI-J3
AO-A3, DO-A3
Figure 7.1 shows an exploded view of the drive with the option and related components for reference.
A – Drive front cover
B – HOA keypad
C – LED label (for communication
D – Drive terminal cover
E – Removable tabs for wire routing
F – Included screws
G – Ground wire
228
Table 7.1 Option Installation
H
G
F
options)
Figure 7.1 Drive Components with Option
Port/Connector
CN5-A
CN5-A, B, C
I
J
K A
M
L
E
D
H – Drive grounding terminal (FE)
I – Connector CN5-C
J – Connector CN5-B
K – Connector CN5-A
L – Insertion point for CN5 connector
M – Option
YASKAWA TOEP YAIP1W 01A YASKAWA AC Drive - iQpump1000 Quick Start Guide
Number of Options Possible
1
1
B
C
NS NS MS MS
TX RX