Lcd Display - YASKAWA iQpump1000 Quick Start Manual

4.3 Using the HOA Keypad
u

LCD Display

No. Name
1 Operation Mode Menus
2 Mode Display Area
3 Ready
4 Data Display
Frequency
Reference
5
<1>
Assignment
LOCAL/REMOTE
6
<2>
Display
112
Figure 4.3 LCD Display
Table 4.3 Display and Contents
Display
MODE Displayed when in Mode Selection.
QMONI:
Instructions to access the Quick Monitors.
Use F1/F2
MENU: Use
Instructions to access the next menu item.
UP/DWN
MONITR Displayed when in Monitor Mode.
VERIFY Indicates the Verify Menu.
PRMSET Displayed when in Parameter Setting Mode.
A.TUNE Displayed during Auto-Tuning.
SETUP Displayed when in Setup Mode.
DRV Displayed when in Drive Mode.
PRG Displayed when in Programming Mode.
Rdy Indicates the drive is ready to run.
— Displays specific data and operation data.
OPR Displayed when the frequency reference is assigned to the HOA keypad.
Displayed when the frequency reference is assigned to the MEMOBUS/Modbus Communication
COM
Inputs of the drive.
OP Displayed when the frequency reference is assigned to option card connected to the drive.
AI Displayed when the function reference is assigned to an analog input.
OFF Displayed when HAND mode is OFF.
Displayed when the Run command is supplied from a remote source.
RSEQ
Note: This display will blink when b1-02 is set to 1 (Digital Inputs).
LSEQ Displayed when the Run command is supplied from the HOA keypad.
Displayed when the Run command is supplied from a remote source.
RREF
Note: This display will blink when b1-01 is set to 1 (Analog Inputs).
LREF Displayed when the Run command is supplied from the HOA keypad.
Content
YASKAWA TOEP YAIP1W 01A YASKAWA AC Drive - iQpump1000 Quick Start Guide