Environmental Specifications; First Print Output Time - Xerox Phaser 6300 Service Manual

Environmental Specifications

Characteristic
Temperature:
Operating
Optimal Print Quality Range
Storage
12 month maximum
48 hours maximum
Humidity (RH)
Operating
Optimal Print Quality Range
Altitude
Operating
Transportation
Acoustic Noise (Lwa)
Idle
Printing

First Print Output Time

First Print Output Time (FPOT) is defined as a time from reciept of the print
command in Ready mode until the first page sourced from either Tray 1 or Tray 2 is
delivered to the Output Tray. Sourcing media from the optional trays increases FPOT.
Note
This does not include the execution times for the Boot Loader or POST which
vary depending on printer configuration.
Process Speed
Full
High
Mid
Low
These conditions apply to the values in the table above:
* At Fuser ready and Laser Unit Motor is rotating normally.
** At Fuser stand-by and Laser Unit Motor Off.
A4 SEF paper
Plain paper mode
1-16
Specification
o
5 C to 32
o o
15 -28 C (60
o
Normal: 0
Severe: -20
15% - 85% RH
20% to 70% RH
0 - 3,100 meters (10,170 ft.)
0 - 15,000 meters (30,000 ft.) in pressurized containers.
Printer Only
5.0 B or less
6.65 B or less (Full Speed)
6.65 B or less (Half Speed)
First Print Out Time (seconds)
Simplex
Laser Unit Ready* Laser Unit Off** Laser Unit Ready* Laser Unit Off**
6.0
8.0
10.5
15.0
Phaser 6300/6350 Color Laser Printer Service Manual
o o o
C (41 F to 90 F)
o o
to 82 F)
o o
C to 35 C (32 F to 95
o o o
C to 40 C (-4 F to 104
10.5 10.0
12.5 13.5
15.0 17.5
19.5 25.5
o
F), at 15% - 85% RH
o
F) at 5% - 95% RH
With Feeder Option
5.0 B or less
7.35 B or less (Full Speed)
7.30 B or less (Half Speed)
Duplex
14.5
18.0
22.0
30.0