TQ6000 GEN2 Access Points User's Guide
Displaying Basic System Information
34
To display basic information about the access point, such as its firmware
version number and MAC address, perform the following procedure:
1. Select Monitoring > Status from the main menu.
2. Select System from the sub-menu. This is the default window. Refer
to Figure 4.
The fields are defined in Table 2.
Item Name
Model
Firmware Version
Firmware Build Date
Figure 4. System Window
Table 2. System Window
Description
Displays the product's model name.
Displays the version number of the management
software on the access point.
Displays the date and time when the firmware
was built.