Table of Contents
Advertisement
TQ6000 GEN2 Access Points User's Guide
RADIUS Server
for
Authentication
and Proxy Server
for Web Hosting
138
Table 25. Captive Portal - External Page Redirect (Continued)
Field
RADIUS Port
RADIUS
Accounting
Session Timeout
Session Timeout
Action
Walled Garden
7. Click the SAVE & APPLY button to save and update the configuration,
or configure other VAPs and save the configurations at once later.
8. Or click VIEW QR CODE to generate a QR code.
To delegate RADIUS servers to authenticate wireless clients and a Proxy
server to host web pages, perform the following procedure:
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
You can configure only one radio at a time.
3. Select a VAP to configure from the next sub-menu. The default is
VAP0.
Description
Enter the RADIUS port number of the RADIUS
server. If you entered IP addresses for both
primary and secondary servers, the units must be
using the same port number. The range is 0 to
65535. The default is 1812.
Control RADIUS accounting, When accounting is
enabled, the access point sends client
information, such as usage time, to the RADIUS
server. The options are listed here:
- Enabled: Activate RADIUS accounting.
- Disabled: Deactivate RADIUS accounting. This
is the default setting.
See Table 24 on page 132.
See Table 24 on page 132.
Note
URLs where wireless clients are redirected
must be entered.
Advertisement
Table of Contents
