Table 11. Web Window - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide
56
3. Configure the fields by referring to Table 11.
Field
Maximum Sessions
Session Timeout
HTTP Status
HTTP Port
HTTPS Status
Self Signed
Certificate
4. Click the SAVE & APPLY button to save and update the configuration.
Note
If you disabled the HTTP or HTTPS mode you are currently using to
manage the device, the access point ends your management
session. To resume managing the device, start a new session using
the other mode.

Table 11. Web Window

Description
Specify the maximum number of active
management sessions the access point will
support at one time. Here are the guidelines:
- The range is 1 to 10 sessions.
- The number of sessions is the sum of
HTTP and HTTPS connections.
- The default is five sessions.
- The access point blocks new management
session after reaching the maximum
number of sessions.
Specify the time in minutes when the access
point automatically ends inactive sessions.
The range is 1 to 1440 minutes (1440
minutes = 1 day). The default is five minutes.
Enable or disable HTTP management. The
default is enabled.
Specify the port number of the HTTP server.
The range is 0 to 65535. The default is 80.
Enable or disable HTTPS management. The
default is disabled. The HTTPS server uses
port 443. It cannot be changed.
Generate a self-signed certificate for HTTPS
management. The access point comes with
a certificate, but you can generate a new one
with this option. The new certificate
automatically replaces the old certificate.