Downloading The Configuration Of The Access Point To Your Computer; Figure 56: Configuration Window - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide

Downloading the Configuration of the Access Point to Your Computer

168
This procedure explains how to download the configuration of the access
point as a file to your computer. You might perform this procedure to
maintain a history of the configurations of the unit so that you can easily
restore a configuration, if needed. This procedure is also useful if there are
several access points that are to have the same or nearly the same
settings. You can configure one unit and then transfer its configuration to
the other units. Please review the following information before performing
this procedure:
You cannot edit a configuration file with a text editor.

This procedure does not interrupt the operations of the access

point.
To download the configuration of the access point as a file to your
workstation, perform the following procedure:
1. Select Maintenance > Configuration from the main menu. Refer to
Figure 56.
Figure 56. Configuration Window
2. Click the Download button in the Backup section of the window.
Your web browser prompts you to save a config.txt file.
3. Save the file on your system.
You can change the filename The filename suffix must be "txt".