Viewing Fast Roaming; Guidelines For Fast Roaming; Viewing The Ieee802.11R Parameter Values - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide

Viewing Fast Roaming

Guidelines for
Fast Roaming
Viewing the
IEEE802.11r
Parameter Values
146
The access point supports IEEE802.11k/v/r for high-speed roaming
wireless clients.
Here are the guidelines:
You cannot configure Fast Roaming on the access point.

Configuring the settings requires Vista Manager EX and AWC.
When the Security is set to WPA Personal or WPA Enterprise, you

can view the parameter values.
The View QR Code button is not supported on the Fast Roaming

window.
To view the parameter values set to Fast Roaming IEEE802.11r, perform
the following procedure:
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
3. Select a VAP.The default is VAP0.
4. Select the Fast Roaming tab. See Figure 52 on page 147.
Note
The Fast Roaming window shown in Figure 52 on page 147 is when
the VAP Security is set to WPA Personal or WPA Enterprise.