Displaying the Status of LAN Port
To display the status of LAN port, perform the following procedure:
1. Select Monitoring > Status from the main menu.
2. Select LAN1 or LAN2 from the sub-menu. See Figure 26.
Figure 26. Status of LAN1 Port Window
The fields are defined in Table 15.
Table 15. Status of LAN1 or LAN2 Window
Item Name
Mode (LAN2 Only)
Status
Link Speed
Description
Displays LAN2 Port Configuration. The
options are:
- Disabled
- Static LAG
- Cascade
Displays the status of the LAN port. The
possible states are listed here:
- Up: The port has established a link with
a network devices, such as an Ethernet
switch or router.
- Down: The port has not established a
link with a network device.
Displays the speed of the link (100, 1000,
2500, or 5000 Mbps).
Chapter 4: LAN Port
75