Table 10. Time Window - Manually Option - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide
54
3. Configure the parameters by referring to Table 10.

Table 10. Time Window - Manually Option

Field
Set System Time
Current System
Time (24 HR)
Timezone
Enable Daylight
Savings
Start
(Daylight Saving)
End
(Daylight Saving)
Offset
(Daylight Saving)
System Date
System Time
4. Click the SAVE & APPLY button to save and update the configuration.
Description
Select Manually. This is the default.
Displays the current date and time settings.
Click the AUTO button to set the date and
time on the access point according to your
management workstation.
Select the Time Zone of the access point
from the pull-down menu.
If the location of the access point observes
daylight savings time, click the dialog box for
the Adjust Time for Daylight Savings
parameter. The window displays the fields in
Figure 12 on page 52
If the area does not observe Daylight
Savings time, leave the check box empty.
Use the pull-down menus to set the date and
time for the start of Daylight Savings Time.
Use the pull-down menus to set the date and
time for the end of Daylight Savings Time.
Use the pull-down menu to select the
number of minutes to adjust the time at the
start and end Daylight Saving Time. The
default is 60 minutes.
Use the pull-down menus to set the current
month, day, and year.
Use the pull-down menus to set the current
hours and minutes. The hours are in 24
hours. For example, 14 represent 2:00 p.m.