Configuring The Radios; Configuring Basic Radio Settings; Figure 27: Basic Radio Settings Window - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Poinst User's Guide

Configuring the Radios

Configuring
Basic Radio
Settings
78
The radio settings are divided into two groups:
"Configuring Basic Radio Settings" next

"Configuring Advanced Radio Settings" on page 81

To configure the basic settings for Radio1 or Radio2, perform the following
procedure:
1. Select Settings > Radio.
2. Select Radio1 or Radio2 from the sub-menu. You can configure only
one radio at a time.
3. Click the Basic Settings tab shown in Figure 27. This is the default
tab.
Figure 27. Basic Radio Settings Window
4. Configure the settings by referring to Table 16 on page 79.