Chapter 3: System Settings - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

Chapter 3
System Settings
This chapter contains the following procedures:
"Assigning a Dynamic IP Address from a DHCP Server" on page 44

"Assigning a Static IPv4 Address to the Access Point" on page 47

"Setting the Date and Time with the Network Time Protocol (NTP)" on

page 50
"Manually Setting the Date and Time" on page 53

"Configuring the Web Browser Interface" on page 55

"Configuring SNMPv1, SNMPv2, and SNMPv3" on page 57

"Displaying the System Log" on page 61

"Sending Log Messages to a Syslog Server" on page 62

"Enabling or Disabling the LEDs" on page 64

"Configuring PoE Negotiation with Link Layer Discovery Protocol

(LLDP)" on page 65
"Enabling or Disabling the Reset Button" on page 67

43