Configuring the Web Browser Interface
This section has the following management functions:
Specify the maximum number of administrators that can manage
the access point at one time with the web browser interface.
Specify the time interval after which the access point automatically
ends inactive management sessions.
Enable or disable HTTP or HTTPS web management.
Generate a self-signed HTTPS certificate.
Note
Do not disable both HTTP and HTTPS. Otherwise, you will not be
able to manage the access point with a web browser.
Note
HTTP management is non-secure, meaning the packets exchanged
between the access point and your workstation are sent in clear text,
leaving them vulnerable to snooping. For this reason, Allied Telesis
recommends using HTTPS to manage the access point.
To configure the above functions, perform the following procedure:
1. Select Settings > System from the main menu.
2. Select Web from the sub-menu. Refer to Figure 14.
Figure 14. Web Window
Chapter 3: System Settings
55