Table of Contents
Advertisement
Setting the Country and Location
Setting the
Country
You should set the country and location during the initial management
session of the access point to ensure that the device operates in
compliance with the codes and regulations of your region or country.
Note
The non-US model of this product has a country code setting that
must be set during the initial management session of the unit. The
setting ensures that the unit operates in compliance with the laws
and regulations of your country or region.
For the US model, the country code is preset and cannot be
changed. Per FCC regulations, the country code setting for all WiFi
products marketed in the US must be fixed to US operational
channels only.
To set the country, perform the following procedure:
1. Select Settings > Radio from the menu on the left.
The access point displays the Basic Settings for Radio 1. See
Figure 39 for example.
Figure 39. Basic Settings for Radio1
Chapter 2: Installing the Access Point
69
Advertisement
Table of Contents
