Displaying Associated Clients; Figure 8: Associated Client Window; Table 6. Associated Client Window - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide

Displaying Associated Clients

42
To view the active wireless clients on the VAPs of the access point, select
Monitoring > Associated Clients from the main menu. Refer to Figure 8.
Figure 8. Associated Client Window
The columns are defined in Table 6.

Table 6. Associated Client Window

Column
MAC Address
IPv4 address
NetBIOS name
SSID
Channel
Signal
(dBm)
Rate (Mbps)
Disconnect
Description
Displays the MAC addresses of associated
clients.
Displays the IPv4 address of associated clients.
It is displayed when IPv4 is used.
Displays the NetBIOS name of associated
clients. It displays "n/a" when NetBIOS name is
not acquired or during the acquisition.
Displays the network name (SSIDs) to which the
client is connected.
Displays the radio channel the client is using.
Displays the strength of the signal from the
client.
Displays the transmission (Tx) and reception
(Rx) rates in Mbps.
Displays the Disconnect button. Clicking the
button disconnects the client.