Figure 37: Static Wep In The Vap Security Tab; Table 20. Static Wep Security Tab - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide
112
Figure 37. Static WEP in the VAP Security Tab
6. Configure the parameters by referring to Table 20.

Table 20. Static WEP Security Tab

Field
Select Static WEP.
Mode
Authentication Specify whether the access point authenticates VAP
clients. Here are the options.
- Open System: The access point does not
- Shared Key: Clients must have the correct WEP
Description
authenticate VAP clients. All clients, even those
without correct WEP keys, can connect to the
VAP. This is the default setting.
Clients in an open system VAP still must have the
correct WEP key to encrypt and decrypt the traffic
they exchange with the access point.
key to connect with the VAP. Clients without the
correct WEP key cannot associate with it.