Configuring Station Edca Parameters; Table 32. Qos Window - Station Edca Parameters - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide

Configuring Station EDCA Parameters

164
Table 32 defines the Station EDCA parameters in the QoS window in
Figure 55 on page 159.

Table 32. QoS Window - Station EDCA Parameters

Parameter
Data Type (Queue)
AIFS (InterFrame
Space)
Description
Specifies the four ingress queues:
- Data 0 (Voice) - High priority queue, with
minimum delay. The queue is used to store
time-sensitive data, such as VOIP and
streaming media.
- Data 1 (Video): High priority queue, with
minimum delay. The queue is used to store
time-sensitive data, such as video traffic.
- Data 2 (best effort): Medium priority queue,
with minimum throughput and delay. The
queue is used to store most traditional IP data.
- Data 3 (Background): Lowest priority queue,
with high throughput. This queue is used for
bulk data that requires maximum throughput
and is not time-sensitive, such as FTP packets.
Select the Arbitration Inter-Frame Spacing (AIFS)
value to control the wait time for data frames. The
wait time is measured in slots and has the range
1 to 15 slots. The defaults are listed here:2 for
Data 0 and Data 1, 3 for Data 2, and 7 for Data 3.