TQ6000 GEN2 Access Points User's Guide
Features
18
Hardware features include:
One 2.4GHz radio
One 5GHz radio
Internal omni-directional antennas
Two 100/1000Mbps/2.5G/5G Ethernet ports with RJ-45
connectors
Note
The LAN2 port is not supported.
PoE+ Class 4 powered device
One Reset button for restoring the default settings
One AC power adapter connector
LEDs for 2.4GHz and 5GHz radios, LAN1 and LAN2 ports, and
power
Kensington lock port
Ceiling, wall, or table installation
Installing on the Cisco or Fortimet mounting brackets using
BRKT-CONV-AP1 converter bracket
One Console RS232 RJ-45 port for factory use only
Features of the 2.4GHz and 5GHz radios include:
IEEE802.11a/b/g/n/ac/ax
Automatic channel selection
Band steering
Wi-Fi multimedia (WMM) for prioritizing traffic
Features of system power and Power over Ethernet (PoE):
PoE+ (IEEE 802.3at)
Maximum power consumption: 22.03W
Power saving mode: support IEEE802.3af when either 2.5G or 5G
is disabled.
Redundant power by AC adapter and PoE+ ports