Wpa Personal (Pre-Shared Key) - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

WPA Personal
(Pre-Shared Key)
Table 20. Static WEP Security Tab (Continued)
Field
Key Length Select a key length. The options are:
- 128 bits. This is the default setting.
- 64 bits
Key Type Seelect a key type: The options are:
- Hex: Enter keys in hexadecimalnumbers. This is
- ASCII: Enter keys in ASCII
Transfer Key Select the key the access point should use to
Index encrypt network traffic. You can select only one key.
Key 1 to 4 Enter up to four WEP keys in the fields numbered 1
to 4. Here are the guidelines:
- When the key length is set to 128 bits: 26
- When the key length is set to 64 bits: 10
- Keys are case-sensitive.
- The order of the keys has be the same on the
The small double-arrow symbols by the fields toggle
the keys between alphanumeric characters and
asterisks.
7. Click the SAVE & APPLY button to save and update the configuration,
or configure other VAPs and save the configurations at once later.
8. Or click VIEW QR CODE to generate a QR code.
To configure a VAP for WPA Personal security, perform the following
procedure:
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
You can configure only one radio at a time.
3. Select a VAP to configure from the next sub-menu. The default is
VAP0.
Description
the default setting.
hexadecimal numbers in Hex 13 alphanumeric
characters in ASCII.
hexadecimal numbers in Hex 5 alphanumeric
characters in ASCII.
access point and clients.
Chapter 7: Virtual Access Points
113