Table of Contents
Advertisement
TQ6000 GEN2 Access Points User's Guide
Delegating a
Proxy Sever to
Interact with
Wireless Clients
134
Table 24. Captive Portal - Click-Through (Continued)
Field
Walled Garden
Enter the URLs of up to fifty approved HTTP web
sites that wireless clients can access through the
captive portals on the access point, without having to
log on. Wireless clients who access only approved
sites are not authenticated. Those who try to access
unapproved web sites are shown to a logon window.
The feature is supported on all radios, VAPs, and
captive portals.
To add the first HTTP web site, enter it in the empty
field. You can identify a site by its fully qualified
domain name (FQDN), IPv4 address, or IPv4
address and mask (e.g 32.134.45.0/24). When using
FQDN, do not include "HTTP://". To add more URL
addresses, click the green add icon to the right of the
last URL field. You can enter up to fifty sites.
8. Click the SAVE & APPLY button to save and update the configuration,
or configure other VAPs and save the configurations at once later.
9. Or click VIEW QR CODE to generate a QR code.
When you want to display one web page with a Agree button to wireless
client without authenticating wireless clients, perform the following
procedure:
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
You can configure only one radio at a time.
3. Select a VAP to configure from the next sub-menu. The default is
VAP0.
Note
You can configure multiple VAPs without saving each VAP
configuration page. You can save multiple VAP configurations all at
once by clicking the SAVE & APPLY button.
4. Select the Captive Portal tab.
5. Select Click-Through from the Captive Portal pull-down menu.
6. Select Enabled from the Authentication Page Proxy pull-down menu.
See Figure 46.
Description
Advertisement
Table of Contents
