Chapter 1: Product Description
LEDs
28
The LEDs on the top panel display status information. See Figure 10 for
LEDs and Table 1 for the status definition.
Figure 10. TQ6602 GEN2 and TQm6602 GEN2 Access Points' LEDs
Table 1. LED Status Information
LED
State
Green
Blinking Green
PWR/
Red
SYS
Blinking Red
Off
Green
Blinking Green
LAN1
Amber
Off
Description
The access point is powered ON and
operating normally.
The access point is booting up.
The access point has encountered a fault
condition.
The access point is upgrading its firmware.
The access point is not receiving power.
The port has established a link to a
network device.
The port is transmitting or receiving data.
The port is connected to PoE+ power
sourcing equipment.
The port has not established a link to a
network device.