No
Authentication
and Web Page
Stored in the
Access Point
When you want to display one web page with a Agree button to wireless
client without authenticating wireless clients, perform the following
procedure:
1. Select Settings > VAP / Security from the main menu.
2. Select Radio1 or Radio2 from the sub-menu. The default is Radio1.
You can configure only one radio at a time.
3. Select a VAP to configure from the next sub-menu. The default is
VAP0.
Note
You can configure multiple VAPs without saving each VAP
configuration page. You can save multiple VAP configurations all at
once by clicking the SAVE & APPLY button.
4. Select the Captive Portal tab.
5. Select Click-Through from the Captive Portal pull-down menu. See
Figure 46 on page 135.
6. Select Disabled from the Authentication Page Proxy pull-down menu.
Chapter 7: Virtual Access Points
131