Allied Telesis TQ6000 GEN2 Installation Manual
  1. Manuals
  2. Brands
  3. Allied Telesis Manuals
  4. Wireless Access Point
  5. TQ6000 GEN2
  6. Installation manual

Allied Telesis TQ6000 GEN2 Installation Manual

802.11ax dual-radio 5g/2.4ghz 8x8+4x4 access points
Hide thumbs Also See for TQ6000 GEN2:
Table of Contents

Advertisement

Quick Links

Download this manual
TQ6000 GEN2
WIRELESS ACCESS POINTS
TQ6702 GEN2
TQm6702 GEN2
802.11ax Dual-radio 5G/2.4GHz 8x8+4x4 Access Points
TQ6602 GEN2
TQm6602 GEN2
802.11ax Dual-radio 5G/2.4GHz 4x4+4x4 Access Points
Installation Guide
613-002972 Rev. B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TQ6000 GEN2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Allied Telesis TQ6000 GEN2

Summary of Contents for Allied Telesis TQ6000 GEN2

  • Page 1 TQ6000 GEN2 WIRELESS ACCESS POINTS TQ6702 GEN2 TQm6702 GEN2 802.11ax Dual-radio 5G/2.4GHz 8x8+4x4 Access Points TQ6602 GEN2 TQm6602 GEN2 802.11ax Dual-radio 5G/2.4GHz 4x4+4x4 Access Points Installation Guide 613-002972 Rev. B...
  • Page 2 Allied Telesis, Inc. has been advised of, known, or should have known, the...
  • Page 3 TQ6000 GEN2 Access Points Installation Guide Electrical Safety and Emissions Standards This product meets the following standards: “Federal Communications Commission Interference Statement”  “European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical  and Electronic Equipment” on page 4 “Safety and Electromagnetic Emissions”...
  • Page 4 European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment This Allied Telesis RoHS-compliant product conforms to the European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment. Allied Telesis ensures RoHS conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining manufacturing process controls.
  • Page 5 TQ6000 GEN2 Access Points Installation Guide Safety and Electromagnetic Emissions Standard Compliance RoHs compliant  European Union RoHS (Directive 2011/65/EU of the European Parliament and of the Council  of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.)
  • Page 6 Electro Magnetic Interference (EMI) FCC part15 Subpart B/ Class B  EN55032 Class B  VCCI-CISPR 32 / Class B  AS/NZS CISPR 32  Electro Magnetic Susceptibility - EN55024 and EN55035 IEC 61000-4-2  IEC 61000-4-3  IEC 61000-4-4 ...
  • Page 7 TQ6000 GEN2 Access Points Installation Guide AS/NZS CISPR 32  AS/NZS 4268  ICES-003  RSS-102  RSS-247  Japan JATE  ARIB STD-T66  ARIB STD-T71  Hong Kong OFCA India WPC Malaysia SIRIM Singapore IMDA TS SRD Complies with...
  • Page 8 PDF  document titled Translated Safety Statements on the Allied Telesis website at www.alliedtelesis.com/library. Remarque: Les consignes de sécurité portant le symbole  sont traduites dans plusieurs langues dans le document Translated Safety Statements, disponible à...

  • Page 9: Table Of Contents

    Contents Preface ................................15 Safety Symbols Used in this Document ....................16 Contacting Allied Telesis ........................... 17 Chapter 1: Product Description ........................19 Features ..............................20 TQ6000 GEN2 Models..........................23 Hardware Components ..........................25 Cable Hide............................27 Console Port............................27 Power Switch............................27 Kensington Lock Hole..........................
  • Page 10 Contents External AC Adapter Specifications .....................60 PoE+ Power Requirements........................60 Cable Specifications ...........................61 LAN Ports Specifications and Pinouts ......................62 Port Specifications ..........................62 Port Pinouts............................62 Appendix B: Regulatory Statements ......................63 Federal Communication Commission Interference Statement ..............64 Industry Canada Statement........................66 Europe - EU Declaration of Conformity ...................... 68 Operating Frequencies and Maximum Transmission Power Levels ............68 Radiation Exposure Statement ......................69 Importer..............................69...
  • Page 11 Figure 9: LAN2 Port in Cascade Mode with a Networking Device ..............29 Figure 10: PWRADP-01 (DA-48Z12) Power Adapter..................32 Figure 11: TQ6000 GEN2 Access Point Top View - LEDs................33 Figure 12: Shipping Box Components......................39 Figure 13: Approved Installation Orientations on a Ceiling, Wall, or Table ............. 41 Figure 14: Attaching the Bracket Screws to the Access Point.................
  • Page 12 List of Figures...
  • Page 13 Tables Table 1. Product Limitations ........................... 22 Table 2. Differences Between the TQ6000 GEN2 Access Points ..............23 Table 3. LED Status Information ........................33 Table 4. Physical Specifications ........................59 Table 5. Environmental Specifications ......................59 Table 6. External AC/DC Adapter Specifications ................... 60 Table 7.
  • Page 14 List of Tables...

  • Page 15: Preface

    GEN2 Access Points. The access point models included in this manual are: TQ6702 GEN2  TQm6702 GEN2  TQ6602 GEN2  TQm6602 GEN2  This preface contains the following sections: “Safety Symbols Used in this Document” on page 16  “Contacting Allied Telesis” on page 17 ...

  • Page 16: Safety Symbols Used In This Document

    Preface Safety Symbols Used in this Document This document uses the following conventions. Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury.

  • Page 17: Contacting Allied Telesis

     user guides, software release notes, white papers and data sheets for your product. Warranty - View a list of products to see if Allied Telesis warranty  applies to the product you purchased and register your warranty. Allied Telesis Helpdesk - Contact a support representative.
  • Page 18 Preface...

  • Page 19: Chapter 1: Product Description

    The sections in this chapter describe the hardware components of the TQ6000 GEN2 Wireless Access Points: “Features” on page 20  “TQ6000 GEN2 Models” on page 23  “Hardware Components” on page 25  “LAN1 and LAN2 Ports” on page 28 ...

  • Page 20: Features

    Chapter 1: Product Description Features Hardware features include: One 2.4GHz radio  One 5GHz radio  Internal omni-directional antennas  Two 100/1000Mbps/2.5G/5G Ethernet ports with RJ-45  connectors PoE+ Class 4 powered device  One Reset button for restoring the default settings ...
  • Page 21 TQ6000 GEN2 Access Points Installation Guide Cascade configuration  On-board web browser management interface  Virtual access point (VAP)  Network Time Protocol (NTP) client  Dynamic Host Control Protocol (DHCP) client  Static WEP, WPA Personal, and WPA Enterprise security ...

  • Page 22: Table 1. Product Limitations

    Chapter 1: Product Description Table 1 indicates limitations: Table 1. Product Limitations Maximum Feature Item Number Virtual wireless interfaces per RF interface ESSID VLAN ID 4,094 WDS links WDS HOPs Access points managed by AWC 3,000 Client MAC address list 4,096 Authentication...

  • Page 23: Tq6000 Gen2 Models

    TQ6000 GEN2 Access Points Installation Guide TQ6000 GEN2 Models The Table 2 lists the basic differences among four models.. Table 2. Differences Between the TQ6000 GEN2 Access Points TQ6602 TQ6702 TQm6602 TQm6702 Model GEN2 GEN2 GEN2 GEN2 Maximum number of access...
  • Page 24 Chapter 1: Product Description Note The Channel Blankets feature, also referred to as single-channel mode, allows neighboring wireless access points to use the same channels to more efficiently handle roaming wireless clients. The feature requires Vista Manager EX and the Autonomous Wireless Controller (AWC) plug-in.

  • Page 25: Hardware Components

    TQ6000 GEN2 Access Points Installation Guide Hardware Components The top view of the TQ6000 GEN2 Access Point is illustrated in Figure 1. Back Edge Front Edge Figure 1. TQ6000 GEN2 Access Point Top View The bottom view is illustrated in Figure 2.
  • Page 26 Chapter 1: Product Description The front edge view is illustrated in Figure 3. Mounting Bracket Thumb Screw Hole Figure 3. Front Edge View The back edge view is illustrated in Figure 4. Console Port LAN1 POE+ Port DC IN Connector for AC/DC Adapter Power Switch LAN2 POE+ Port Reset Button...

  • Page 27: Cable Hide

    TQ6000 GEN2 Access Points Installation Guide Cable Hide The top cover of the access point is larger than the access point chassis to create space on the back for cable connectors and cables shown in Figure 2 on page 25.

  • Page 28: Lan1 And Lan2 Ports

    Chapter 1: Product Description LAN1 and LAN2 Ports The wireless access point has two Ethernet ports, labeled LAN1 and LAN2. You use the ports to connect the wireless access point to your wired network. Here are their basic properties: LAN1 and LAN2 ports support PoE+. ...

  • Page 29: Cascade Mode

    TQ6000 GEN2 Access Points Installation Guide Note Do not enable and cable the LAN2 port until after you have configured the other network device for the static LAG. Cascade Mode The LAN2 port also has a Cascade mode. The mode allows you to use the port to connect another device to your network.

  • Page 30: Power Over Ethernet Plus (Poe+)

    Chapter 1: Product Description Power Over You can power the wireless access point with either PoE+ on the LAN1 port, LAN2 port or an AC/DC power adapter. The wireless access point is Ethernet Plus a PoE+ Class 4 powered devices, with maximum power consumption of (PoE+) 25.5 watts.

  • Page 31: Cable Requirements

    TQ6000 GEN2 Access Points Installation Guide You cannot disable automatic MDIX detection. For automatic MDIX detection to work properly, this feature must also be present on the Ethernet switch. The LAN port defaults to MDIX if it is connected to a network device that does not support automatic MDIX detection.

  • Page 32: Ac Adapter For External Power Supply

    AC power adapter as its primary power source and PoE+ as redundant power. For technical specifications, refer to “Power Specifications” on page 60. The PWRADP-01 (DA-48Z12) Power Adapter, shown in Figure 9, from Allied Telesis is approved for this product. Figure 9. PWRADP-01 (DA-48Z12) Power Adapter...

  • Page 33: Leds

    TQ6000 GEN2 Access Points Installation Guide LEDs The LEDs on the top panel display status information. See Figure 10 for LEDs and Table 3 for the status definition. Figure 10. TQ6000 GEN2 Access Point Top View - LEDs Table 3. LED Status Information State Description...
  • Page 34 Chapter 1: Product Description Table 3. LED Status Information (Continued) State Description Green The port has established a link to a network device. Blinking Green The port is transmitting and receiving data. LAN2 Amber The port is connected to PoE+ power sourcing equipment.

  • Page 35: Chapter 2: Installing The Wireless Access Point

    Chapter 2 Installing the Wireless Access Point This chapter contains the installation procedures for the TQ6000 GEN2 Access Points. The procedures are detailed in the following sections: “Reviewing Safety Precautions” on page 36  “Unpacking the Shipping Box” on page 39 ...

  • Page 36: Reviewing Safety Precautions

    Chapter 2: Installing the Wireless Access Point Reviewing Safety Precautions Please review the following safety precautions before installing the access point. Important: Safety statements that have the  symbol are translated into multiple languages in the Translated Safety Statements document, which is available at www.alliedtelesis.com/library.

  • Page 37: Table 6. External Ac/Dc Adapter Specifications

    TQ6000 GEN2 Access Points Installation Guide Warning FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  Note The access point must be powered by: 1.
  • Page 38 Chapter 2: Installing the Wireless Access Point Note If you are not using PoE to power to unit, use only an approved AC/ DC adapter. Refer to “Power Specifications” on page 60. Caution The unit does not contain serviceable components. Please return damaged units for servicing.

  • Page 39: Unpacking The Shipping Box

    Allied Telesis. 2. Verify the contents of the shipping box listed in Table 11. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance. Figure 11. Shipping Box Components...

  • Page 40: Reviewing Installation Guidelines

    Chapter 2: Installing the Wireless Access Point Reviewing Installation Guidelines Review the following guidelines before installing the access point: The ceiling or wall mounting surface must be of proper material to  accommodate the screws and strong enough to support the weight of the access point and cables.
  • Page 41 TQ6000 GEN2 Access Points Installation Guide Ceiling Installation Wall Installation Table Installation Figure 12. Approved Installation Orientations on a Ceiling, Wall, or Table...

  • Page 42: Installing The Access Point On A Table

    Chapter 2: Installing the Wireless Access Point Installing the Access Point on a Table You need the following items to install the access point on a table: TQ6000 GEN2 Access Point  One or two Ethernet cables  External AC power adapter (Optional if using PoE+. Required if not ...

  • Page 43: Overview To Installing The Access Point On A Wall Or Ceiling

    TQ6000 GEN2 Access Points Installation Guide Overview to Installing the Access Point on a Wall or Ceiling Here are the procedures for installing the wireless access point on a wall or ceiling: “Pre-fitting the Mounting Bracket on the Access Point” on page 44 ...

  • Page 44: Pre-Fitting The Mounting Bracket On The Access Point

    Chapter 2: Installing the Wireless Access Point Pre-fitting the Mounting Bracket on the Access Point To pre-fit the mounting bracket on the access point, perform the following procedure: 1. Place the wireless access point upside down on a table. 2. Install the two screws (provided) fully into the bottom panel of the access point.
  • Page 45 TQ6000 GEN2 Access Points Installation Guide 3. Make sure that the mounting bracket fits to the access point by sliding the bracket beneath the screws as shown in Figure 15. Figure 15. Attaching the Mounting Bracket on the Access Point 4.

  • Page 46: Installing The Mounting Bracket On A Wall Or Ceiling

    Chapter 2: Installing the Wireless Access Point Installing the Mounting Bracket on a Wall or Ceiling To install the mounting bracket on a wall of ceiling, perform the following procedure: 1. Choose the location and orientation for the access point on the wall or ceiling.
  • Page 47 TQ6000 GEN2 Access Points Installation Guide 5. Install two M4 screws and anchors (if required). Leave the screws loose enough so that the bracket can slide under the screw heads. Refer to Figure 18. Note For a wooden wall or ceiling, use M4 x 25 mm flat-head wood screws and anchors, if required.
  • Page 48 Chapter 2: Installing the Wireless Access Point 6. Insert the openings of the bracket key-hole slots under the two screw heads and slide the bracket into the narrow end of the key-hole slot openings. See Figure 19. Figure 19. Installing the Mount Bracket On the Screws 7.
  • Page 49 TQ6000 GEN2 Access Points Installation Guide 9. Install and tighten two M4 screws (not provided) in the holes prepared in Step 8. The bracket installation is now complete.See Figure 21. Figure 21. Securing the Mount Bracket 10. Go to “Connecting Ethernet Cables to LAN1 and LAN2 Ports” on...

  • Page 50: Connecting Ethernet Cables To Lan1 And Lan2 Ports

     wireless access point is disabled. You enable them with the on-board web browser management interface. For instructions, see the TQ6000 GEN2 Management Software User’s Guide. Note Do not enable the LAN2 port until you have configured the other network device for the static LAG.
  • Page 51 The default setting for the LAN2 port is disabled, To set it to the Static LAG or Cascade mode, use the on-board web browser management interface, explained in the TQ6000 GEN2 Management Software User Guide. 5. Do one of the following: a.

  • Page 52: Connecting The Ac Power Adapter

    AC power adapter, or both. A wireless access point that is powered by both methods uses the AC adapter as its primary power and PoE as redundant power. For an AC power adapter, Allied Telesis recommends the PWRADP-01 (DA-48Z12) Power Adapter.

  • Page 53: Attaching The Access Point To The Mounting Bracket

    TQ6000 GEN2 Access Points Installation Guide Attaching the Access Point to the Mounting Bracket To attach the wireless access point on the mounting bracket on the wall or ceiling, perform the following procedure: 1. Align the bottom of the access point over the bracket so that the two screws on the bottom of the device fit into the bracket keyholes.
  • Page 54 Chapter 2: Installing the Wireless Access Point Figure 26. Seating the Access Point on the Mounting Bracket 3. Tighten the thumbscrew to secure the access point to the mounting bracket. Refer to Figure 27. Figure 27. Tightening the Mounting Bracket Thumbscrew...
  • Page 55 TQ6000 GEN2 Access Points Installation Guide 4. Place the Ethernet cable(s) and power cable (if any) along the cable guides inside of the top cover in the cable hide space. See Figure 28. Figure 28. Fitting the Cables in the Cable Hide 5.

  • Page 56: Installing An Anti-Theft Device

    Note Anti-theft devices are not available from Allied Telesis. 1. Follow the instructions provided with the vendor’s anti-theft device for the installation. See Figure 29 for the Kensington lock port location.

  • Page 57: Starting The First Management Session

    TQ6000 GEN2 Access Points Installation Guide Starting the First Management Session This section contains an abbreviated version of the procedure to start the first management session. For complete instructions, refer to the TQ6000 GEN2 Management Software User’s Guide. The wireless access point firmware includes a DHCP client. The default setting for the client is enabled.
  • Page 58 Chapter 2: Installing the Wireless Access Point...

  • Page 59: Appendix A: Technical Specifications

    Appendix A Technical Specifications This appendix contains the specifications for the TQ6000 GEN2 Access Points in the following sections: “Physical Specifications”  “Environmental Specifications”  “Power Specifications” on page 60  “Cable Specifications” on page 61  “LAN Ports Specifications and Pinouts” on page 62 ...

  • Page 60: Power Specifications

    Table 7 lists the PoE+ specifications for the PoE LAN ports. Requirements Table 7. PoE+ Power Specifications on LAN Ports Maximum Power Consumption 25.5 watts Rated Voltage DC 48V Rated Current 0.67A Note Allied Telesis recommends using UL-certified PoE injectors.

  • Page 61: Cable Specifications

    TQ6000 GEN2 Access Points Installation Guide Cable Specifications The minimum cable requirements for ports LAN1 and LAN2 are listed here. 100Mbps ports: Standard TIA/EIA 568-B-compliant Category 3  shielded or unshielded cabling. 1G/2.5G/5G ports: Standard TIA/EIA 568-A-compliant Category 5 or ...

  • Page 62: Lan Ports Specifications And Pinouts

    Appendix A: Technical Specifications LAN Ports Specifications and Pinouts Port The access point port specifications are shown in Table 8. Specifications Table 8. LAN Port Specifications Connector Specification PoE standard - LAN1 and LAN2 IEEE 802.3at (class 4) Port Pinouts The pin signal definitions for ports LAN1 and LAN2 are given here.

  • Page 63: Appendix B: Regulatory Statements

    Appendix B Regulatory Statements This appendix contains the following regulatory statements: “Federal Communication Commission Interference Statement” on  page 64 “Industry Canada Statement” on page 66  “Europe - EU Declaration of Conformity” on page 68  “UK - UKCA Declaration of Conformity” on page 70 ...

  • Page 64: Federal Communication Commission Interference Statement

    Appendix B: Regulatory Statements Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 65 TQ6000 GEN2 Access Points Installation Guide Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The AT-TQ6702 GEN2 and AT-TQm6702 GEN2 access points should be installed and operated with minimum distance 22 cm between the radiator and your body. The AT-TQ6602...

  • Page 66: Industry Canada Statement

    Appendix B: Regulatory Statements Industry Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 67 TQ6000 GEN2 Access Points Installation Guide Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles...

  • Page 68: Europe - Eu Declaration Of Conformity

    Appendix B: Regulatory Statements Europe - EU Declaration of Conformity Hereby, Allied Telesis declares that the radio equipment type [ AT-TQ6702 GEN2, AT-TQm6702 GEN2, AT-TQ6602 GEN2, AT-TQm6602 GEN2] is in compliance with Directive 2014/53/EU. Operating The operating frequencies and maximum transmission power levels for...

  • Page 69: Radiation Exposure Statement

    20 cm between the radiator and your Statement body. Importer Allied Telesis International BV Incheonweg 7, 1437 EK Rozenburg Note Contact Allied Telesis for the EU conformity statement. To contact Allied Telesis, visit our web site at www.alliedtelesis.com/contact.

  • Page 70: Uk - Ukca Declaration Of Conformity

    Appendix B: Regulatory Statements UK - UKCA Declaration of Conformity Hereby, Allied Telesis declares that the radio equipment type [AT-TQ6702 GEN2, AT-TQm6702 GEN2, AT-TQ6602 GEN2, AT-TQm6602 GEN2] is in compliance with the Radio Equipment Regulations 2017 Operating The operating frequencies and maximum transmission power levels for...

  • Page 71: Radiation Exposure Statement

    20 cm between the radiator and your Statement body. Importer Allied Telesis International BV 11 Pine Court, Kembrey Park Swindon Wiltshire SN2 8AD, United Kingdom Note Contact Allied Telesis for the UK conformity statement. To contact Allied Telesis, visit our web site at www.alliedtelesis.com/contact.
  • Page 72 Appendix B: Regulatory Statements...

  • Page 73: Appendix C: Radiation Patterns

    Appendix C Radiation Patterns This appendix contains the following sections: “TQ6702 GEN2 and TQm6702 GEN2 Access points” on page 74  “TQ6602 GEN2 and TQm6602 GEN2 Access points” on page 89 ...

  • Page 74: Tq6702 Gen2 And Tqm6702 Gen2 Access Points

    Appendix C: Radiation Patterns TQ6702 GEN2 and TQm6702 GEN2 Access points Antenna Locations Figure 32. Antenna Axes on the TQ6702 GEN2 and TQm6702 GEN2 Access Points Axes on the Access Point Figure 33. Axes on the TQ6702 GEN2 and TQm6702 GEN2 Access Points...

  • Page 75: 4X4 2.4G

    TQ6000 GEN2 Access Points Installation Guide 4x4 2.4G X-Z Plane Y-Z Plane X-Y Plane...

  • Page 76: 4X4 5G

    Appendix C: Radiation Patterns 4x4 5G X-Z Plane Y-Z Plane X-Y Plane...

  • Page 77: Dual 1

    TQ6000 GEN2 Access Points Installation Guide Dual 1 2400MHz, 2450MHz, 2500MHz X-Z Plane Y-Z Plane X-Y Plane...
  • Page 78 Appendix C: Radiation Patterns 5150MHz, 5350MHz, 5550MHz, 5750MHz, 5850MHz X-Z Plane Y-Z Plane X-Y Plane...

  • Page 79: Dual 2

    TQ6000 GEN2 Access Points Installation Guide Dual 2 2400MHz, 2450MHz, 2500MHz X-Z Plane Y-Z Plane X-Y Plane...
  • Page 80 Appendix C: Radiation Patterns 5150MHz, 5350MHz, 5550MHz, 5750MHz, 5850MHz X-Z Plane Y-Z Plane X-Y Plane...

  • Page 81: Dual 3

    TQ6000 GEN2 Access Points Installation Guide Dual 3 2400MHz, 2450MHz, 2500MHz X-Z Plane Y-Z Plane X-Y Plane...
  • Page 82 Appendix C: Radiation Patterns 5150MHz, 5350MHz, 5550MHz, 5750MHz, 5850MHz X-Z Plane Y-Z Plane X-Y Plane...

  • Page 83: Dual 4

    TQ6000 GEN2 Access Points Installation Guide Dual 4 2400MHz, 2450MHz, 2500MHz X-Z Plane Y-Z Plane X-Y Plane...
  • Page 84 Appendix C: Radiation Patterns 5150MHz, 5350MHz, 5550MHz, 5750MHz, 5850MHz X-Z Plane Y-Z Plane X-Y Plane...
  • Page 85 TQ6000 GEN2 Access Points Installation Guide 5G 1 X-Z Plane Y-Z Plane X-Y Plane...
  • Page 86 Appendix C: Radiation Patterns 5G 2 X-Z Plane Y-Z Plane X-Y Plane...
  • Page 87 TQ6000 GEN2 Access Points Installation Guide 5G 3 X-Z Plane Y-Z Plane X-Y Plane...
  • Page 88 Appendix C: Radiation Patterns 5G 4 X-Z Plane Y-Z Plane X-Y Plane...

  • Page 89: Tq6602 Gen2 And Tqm6602 Gen2 Access Points

    TQ6000 GEN2 Access Points Installation Guide TQ6602 GEN2 and TQm6602 GEN2 Access points Antenna Locations Figure 34. Antenna Axes on the TQ6602 GEN2 and TQm6602 GEN2 Access Points Axes on the Access Point Figure 35. Axes on the TQ6602 GEN2 and TQm6602 GEN2 Access...

  • Page 90: 4X4 2.4G

    Appendix C: Radiation Patterns 4x4 2.4G...

  • Page 91: 4X4 5G

    TQ6000 GEN2 Access Points Installation Guide 4x4 5G...
  • Page 92 Appendix C: Radiation Patterns...

This manual is also suitable for:

Tq6702 gen2Tqm6702 gen2Tq6602 gen2Tqm6602 gen2

Table of Contents