Figure 16: Snmp Window - Snmp Enabled; Table 12. Snmp Window - Allied Telesis TQ6000 GEN2 Series Management Software User Manual

TQ6000 GEN2 Access Points User's Guide
58
Figure 16. SNMP Window - SNMP Enabled
4. Configure the parameters by referring to Table 12.
Field
Status
Version

Table 12. SNMP Window

Description
Use this option to activate or deactivate the
SNMP agent on the access point. The options
are explained here:
- Enabled: Select this option to activate the
SNMP agent and trap settings. This allows
you to use SNMP to view the parameter
settings on the access point. It also allows
the access point to send traps. You have to
enable SNMP to configure the settings in
this window and the Trap Settings window.
- Disabled: Select this option to disable
SNMP and the trap settings. This is the
default setting.
Select the desired SNMP version:
- v1/v2c: SNMPv1 and SNMPv2c
- v3: SNMPv3